CLS
Load cell for the measurement of static and dynamic loads in COMPRESSION. |
- Các cảm biến tải trọng hiện do đầu dò AEP sản xuất đều nằm trong các yêu cầu bắt buộc của quy định OIML R60 (Tổ chức đo lường pháp lý quốc tế) quy định tất cả các thử nghiệm (nhiệt độ, độ ẩm, áp suất khí quyển, v.v...) phải được sản phẩm vượt qua để được đưa vào ở các cấp chính xác nhất định C2, C3, C4…
Tải các tế bào.
Bộ chuyển đổi lực.
Chuyển đổi mô-men xoắn.
Bộ chuyển đổi chuyển vị.
Bộ chuyển đổi và máy phát áp suất.
Đồng hồ đo áp suất kỹ thuật số.
Động lực kế.
Dụng cụ điện tử.
Phần mềm ứng dụng.
-Với hơn 40 kinh nghiệm trong lĩnh vực cảm biến trọng lượng, lực, áp suất, mô-men xoắn và dịch chuyển, các sản phẩm của hãng cho đến nay đồng nghĩa với chất lượng và độ tin cậy.
-Nhận thức về việc tương tác với một thị trường cực kỳ phát triển đã giúp Công ty có động lực nghiên cứu liên tục, với mục tiêu là đổi mới công nghệ và đổi mới dòng sản phẩm của riêng mình nhằm đáp ứng yêu cầu của mọi khách hàng.
-Để duy trì sự hiện diện phù hợp và cạnh tranh hơn, đặc biệt là trên thị trường quốc tế, công ty đã dành một phần đáng kể đầu tư của mình trong những năm qua cho việc tự động hóa thậm chí còn tiên tiến hơn các chu trình sản xuất khác nhau và đặc biệt là những gì có thể hỗ trợ tốt hơn nữa. quan hệ giá cả chất lượng của sản phẩm.
-Nhờ kinh nghiệm thiết kế phần cứng và phát triển phần mềm, Công ty cũng có thể cung cấp cải tiến công nghệ cao nhất về thiết bị đo ứng dụng cảm biến, do đó AEP tự đề xuất hình ảnh của một công ty Công nghệ cao.
-Từ đầu những năm 1990, Công ty nhận thấy cần phải điều chỉnh cho phù hợp với các quy định quốc tế và làm việc theo hệ thống chất lượng; yếu tố thúc đẩy này đã dẫn dắt việc quản lý:
-Có Phòng thí nghiệm Đo lường riêng được công nhận là Trung tâm SIT không. 93 vào năm 1996.
-Từ năm 2010, tiếp tục hoạt động với tư cách là phòng thí nghiệm hiệu chuẩn được ACCREDIA công nhận (LAT N° 093).
-Để có Hệ thống chất lượng của công ty được chứng nhận vào năm 2000, theo tiêu chuẩn EN ISO 9001.
-Để có Hệ thống chất lượng của quy trình sản xuất ATEX để sử dụng trong khu vực nguy hiểm được chứng nhận vào năm 2006.
Nhờ hiệu suất và độ tin cậy của sản phẩm,
Đặc biệt chúng tôi nhắc nhở:
Cân điện tử.
Tự động định lượng.
Tự động hóa.
Băng ghế thử nghiệm.
Máy kiểm tra vật liệu.
Môn thủy lực.
Khí nén.
Các phòng thí nghiệm.
Nghiên cứu.
Hiệu chuẩn.
Cảm biến tải trọng hiện do bộ chuyển đổi AEP sản xuất được bao gồm trong các yêu cầu cần thiết của quy định OIML R60 (Tổ chức đo lường pháp lý quốc tế) quy định tất cả các thử nghiệm (nhiệt độ, độ ẩm, áp suất khí quyển, v.v.) mà sản phẩm phải vượt qua để được xếp vào các cấp chính xác nhất định C2, C3, C4…
Để đảm bảo những yêu cầu cần thiết này, bộ chuyển đổi AEP đã tự phát triển một số thiết bị tự động có trọng lượng trực tiếp được ACCREDIA công nhận vào năm 1996 để kiểm soát mô hình theo quy định này.
Cảm biến tải trọng được kiểm tra định kỳ bởi nhân viên của Phòng thí nghiệm Đo lường, người thực hiện các thử nghiệm liên tục trong quá trình sản xuất hàng loạt, với quan điểm luôn cẩn thận để sản phẩm được cải tiến liên tục.
Nhờ bí quyết của nhân viên kỹ thuật, tất cả các thủ tục thực hiện phê duyệt mô hình cho mục đích sử dụng hợp pháp đang được kích hoạt bởi các cơ quan có thẩm quyền kiểm soát.
Tải biến đổi cấu hình thấp phù hợp để làm việc trong môi trường khắc nghiệt.
Độ bền học tập cao
Hoàn toàn được làm bằng thép không gỉ
Hàn LASER hoàn toàn
Mức độ bảo vệ IP68
Long long ổn định
Theo yêu cầu chứng chỉ ATEX (Khu 1 và 21) KHÍ và BỤI
Load cell for the measurement of static and dynamic loads in COMPRESSION. |
Load cell for the measurement of static and dynamic loads in COMPRESSION. |
|
Load cell for the measurement of static and dynamic loads in COMPRESSION |
Load cell for the measurement of static loads in COMPRESSION.
|
BENDING BAEM load cell for the measurement of static and dynamic loads. |
BENDING BAEM load cell for the measurement of static and dynamic loads |
SHEAR BEAM load cell for the measurement of static and dynamic loads |
SHEAR BEAM load cell for the measurement of static and dynamic loads. |
OFF CENTER load cell for the measurement of static and dynamic loads |
Load cell for the measurement of static and dynamic loads in COMPRESSION and TENSION |
Load cell for the measurement of static and dynamic loads in TENSION and COMPRESSION |
Load cell for the measurement of static and dynamic loads in TENSION and COMPRESSION
|
Load cell for the measurement of static and dynamic loads in TENSION and COMPRESSION |
Load cell for the measurement of static and dynamic loads in TENSION |
Load cell for the measurement of static and dynamic loads in TENSION |
Load cell for the measurement of static loads in TENSION
|
Load cell for the measurement of static and dynamic loads in COMPRESSION and TENSION |
Load cell for the measurement of static loads in COMPRESSION and TENSION |
Designing and production of force transducers according to the norms ISO 376 and ASTM E74.
Nominal loads from 50N up to 5MN.
Classes 00, 0.5 and 1
Applications in Compression and Tension.
On request is possible tu have the transducers complete of ACCREDIA Certificate.
|
Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT. AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7) LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°. |
Force transducers for the measurement of static and dynamic loads in COMPRESSION. |
|
The transducer consists of a STRAIN CYLINDER and a FORCE transducer used for the calibration and auto alignment of the joints as well as for the force centering of compression test machines on hardened concrete. Nominal Load 3 MN |
Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION |
Designing and production of STATIC and ROTATING torque transducers according to the norms EA 10-1
Ranges from 0.5 N·m up to 5000 N·m
Precision classes from 0.03% up to 0.20%
Analog and Digital Output: 2mV/V, ±10Volt and USB
Versions with reading ANGLE and SPEED integrated..
NEW PERFORMANCES LOW PRICE and EASY APPLICATIONS |
Manual drive for the calibration of torque KEY wrenches ATC1000 for torque key whit max. ful scale 1000 N•m ATC2000 for torque key whit max. ful scale 2000 N•m |
STATRIC torque transducers for the measurement in clockwise and anticlockwise direction HIGH ACCURACY |
STATRIC torque transducers for the measurement in clockwise and anticlockwise direction |
ROTATING torque transducers for the measurement in clockwise and anticlockwise direction |
Designing and production of straingauge pressure transducers with ranges from 100 mbar up to 2500 bar
Version for RELATIVE, ABSOLUTE, VACUUM and DIFFERENTIAL measures.
With amplified or non-amplified output.
Precision classes from 1.0% up to 0.05%.
high reliability.
DIFFERENTIAL pressure transducers |
DIFFERENTIAL pressure transmitter |
Design and production of digital pressure gauges with ranges from 100 mbar up to 3000 bar
Version for RELATIVE, ABSOLUTE, VACUUM and DIFFERENTIAL measures
Precision classes from 0.5% up to 0.05%
available with high resolutions
Internal batteries
High reliability
RELATIVE pressures from 1 bar to 3000 bar High mechanical strength |
RELATIVE pressure from 100 mbar to 3000 bar TEMPERATURE measurement from 0 to 70°C Linearity and hysteresis 0,15% STANDARD version DMM2 BASE version
|
Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT. Accuracy: 0,10% STANDARD version |
Xem thêm Nhà cung cấp Festo
Xem thêm Nhà cung cấp TR Electronic
Xem thêm Nhà cung cấp Kikusui
Xem thêm Nhà cung cấp Fisher
Xem thêm Nhà cung cấp Intorq
Xem thêm Nhà cung cấp Sitec
Xem thêm Nhà cung cấp Pauly
Xem thêm Nhà cung cấp Ashcroft
Các sản phẩm Red Lion Viet Nam-Endress Hauser Viet Nam-Ramsey Viet nam-Land Ametek Viet Nam tại kho TMP đang có sẵn.
VPĐD : Số 1, Đường 27, Phường Hiệp Bình Chánh, Quận Thủ Đức, TP.HCM
Điện thoại : 0946.452.592 -- Mr Nguyên
Nhân viên kinh doanh : Hà Văn Nguyên (Mr.)
Email : sale01@tmpvietnam.com
VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath
Liên hệ : 0946.452.592 (Mr.Nguyên)
© 2022 Tangminhphat.com, all right reserved.
Loading...